"Chapucillas" Fast Tensor Markise
Verfasst: Mi 29. Apr 2009, 22:41
FAST TENSOR AWNING
In this "Chapucilla" show how to make a quick tensor for the awning, which will prevent that because of an air current, our awnings can rise and cause considerable damage in the hardware of the awning as the anchors of the same , tearing the cloth as a result of our side AC (MH), which will subject the whole box - awnings.
The parts we use are:
1 Strings
2 Tables
3 Hooks
4 Springs
1, Strings the stock of two of proper length as shown in the photographs, at one end will be a coca each.
2 Tables, one for each string, there will be close to their ends two holes with a diameter slightly higher than the bulk of the rope.
3 Hooks are nailed to the floor, leaning on this for more tensile strength, one on one side of each leg of the sheet and away from those at 1 meter.
4 Springs, two of the preferred method for cushioning - attachment to drums of washing machines, easy to acquire in workshops, technical service or scrapping them.
Procedure: Once the awning extended from its housing and unfolded its legs on the floor, diving on the floor the two hooks, as explained above.
Then spend one end of a rope through the inside holes of the two charged at each of the tables, as seen in photographs and on the free end of each rope will knot, taking the rope at one end coca and the other a node is inserted in the table.
Now pass the rope between the two holes of the table by hook nailed to the floor, put the hook in the short pier of coca and the other end of the pier so hooked on the point of attachment of the sheet with their leg .
Tensor is already installed, you only have to take the table with his hand and moved upwards by the rope, stretching it and doing work at the dock, exerting the action of tension, while and after we have removed the hand.
To destensar, only to move the table with his hand towards the bottom of the rope.
All this and many more items you'll see them at:
http://chapucillas.acmur.es/
In this "Chapucilla" show how to make a quick tensor for the awning, which will prevent that because of an air current, our awnings can rise and cause considerable damage in the hardware of the awning as the anchors of the same , tearing the cloth as a result of our side AC (MH), which will subject the whole box - awnings.
The parts we use are:
1 Strings
2 Tables
3 Hooks
4 Springs
1, Strings the stock of two of proper length as shown in the photographs, at one end will be a coca each.
2 Tables, one for each string, there will be close to their ends two holes with a diameter slightly higher than the bulk of the rope.
3 Hooks are nailed to the floor, leaning on this for more tensile strength, one on one side of each leg of the sheet and away from those at 1 meter.
4 Springs, two of the preferred method for cushioning - attachment to drums of washing machines, easy to acquire in workshops, technical service or scrapping them.
Procedure: Once the awning extended from its housing and unfolded its legs on the floor, diving on the floor the two hooks, as explained above.
Then spend one end of a rope through the inside holes of the two charged at each of the tables, as seen in photographs and on the free end of each rope will knot, taking the rope at one end coca and the other a node is inserted in the table.
Now pass the rope between the two holes of the table by hook nailed to the floor, put the hook in the short pier of coca and the other end of the pier so hooked on the point of attachment of the sheet with their leg .
Tensor is already installed, you only have to take the table with his hand and moved upwards by the rope, stretching it and doing work at the dock, exerting the action of tension, while and after we have removed the hand.
To destensar, only to move the table with his hand towards the bottom of the rope.
All this and many more items you'll see them at:
http://chapucillas.acmur.es/