Mobile Freiheit

INSTALL DRYER

Brico Manolo

In this "Chapucilla" we will try to produce a garment for Dryer, drawing in this case the space in the heating compartment.
This compartment is located under the wardrobe, this is an air chamber between the Boiler and the "roof" of this, where to place a metal mesh gabions, because here is where the temperature is higher when the heating underway, which will allow rapid drying of a garment.
The placement of the gabions is done with aluminum profiles, which allow the gabions can be moved out and into the compartment Boiler, we can advance some holes to screw them, under the "roof", to facilitate operation, we put double-sided tape on one surface of each of the profiles, which allow them to stay fixed in place, in order to screw more easily.
Once the package installed, test the ease of extraction and introduction Cestona in their travel guides.
It is advisable to leave the door slightly ajar boiler compartment when the dryer is running, to avoid excessive moisture on the inside, thereby producing a faster drying.

All this and much more themes, may see them at:
http://chapucillas.acmur.es/

Naja... wieder mal so eine Anleitung, wo ich am liebsten nicht neben diesem Womo stehen würde.. Es hat einen Grund, warum dieses Heizungen rundum Einbaufreiräume brauchen... Aber das spielt in Spanien anscheinen keine grosse Rolle...
Einige interessante Dinge hat er ja gebastelt.. Aber anderes ist.. naja.. nicht wirklich empfehlenswert für den Nachbau...

.. Es hat einen Grund, warum dieses Heizungen rundum Einbaufreiräume brauchen...

Dürfte kein Problem sein. Ich habe meine Truma C 3402 E vom Truma-Kundendienst einbauen lassen. Sie befindet sich direkt unter dem Bett und ist von den Matratzen (auf Rollrost) keine 5 cm entfernt.
Der Techniker hatte daran nichts auszusetzen.

Danke, Stormy on the road.