In this "Chapucilla," we will try to solve a problem identified in an AC (MH) of Moncayo, more specifically in a Falcon, he is none other than the entry of outside air, inside the cabin due to a leakproofness deficient in the accommodation of your refrigerator.
In this model, the refrigerator is sealed with respect to his accommodation for his back with a kind of "American film" aluminized, which over time lost their properties and let a free flow of air or other gases between the lateral the side of the refrigerator and the cabinet where you stayed, and at the top of the refrigerator.
Located and examined the problem, we adopted two solutions, one for the top of the refrigerator and one for the bottom and sides.
At the top of the refrigerator, use a board like "foam" very dense and large, due to this huge gap between them, this is one side adhesive, which is used to lift SEALING gates and doors firewalls and placed in the same way as the other board that relate below.
On the sides and bottom of the refrigerator, in these areas due to limited space separation exists, use a rubber gasket Tesa Moll, type "Profile E" for easy acquisition of hardware establishments, first cut a piece of board, leaving the protective role of the adhesive without cutting, so once installed the board, we can easily extract this protector after this, insert the lip of the board in the hole, then the rest of the board, so we'll use a knife without tip or the handle of a spoon, move forward slowly without rushing, trying to be as professional as possible, once affixed to our taste, take the left side of the paper carefully and pull this purpose, this will be coming out and joining the board is perfectly to the cabinet, being removed this entry from outdoor air, which especially welcome in winter.
This topic and many others can see them at:
http://chapucillas.acmur.es/Statistik: Verfasst von johnny — Do 9. Apr 2009, 23:40
]]>